[Home]

[Organization]:
-All
-AECL
-McMaster University
-CNSC
-CANTEACH
-Individual Contributions
-OPG
-University of Toronto
-RdF Corporation
-NB Power
-University of New Brunswick
-Chulalongkorn University
-IAEA
-Babcock & Wilcox Canada
-IMechE
-University of Ontario Institute of Technology
-CNA
-FJOHSS
-UNENE

[Concept]:
-Chemistry and Corrosion
-Component Design Details
-Electrical, Instrumentation & Control
-General
-Generic Design Issues
-Heat and Thermodynamics
-Materials
-Mathematics
-Mechanical
-Overview
-Reactor Physics
-Safety
-Thermalhydraulics

[SI]:
-00000 General Project
-01000 General Engineering (Methods, Policy, Procedures)
-03000 Engineering Science and Technology
-03200 Mechanical Engineering
-03300 Nuclear Engineering
-03400 Radiation Protection (including Waste Management)
-03600 Nuclear Safety (Reactor)
-09000 Special Studies
-10000 Site and Improvements
-20000 Buildings and Structures
-30000 Reactor, Steam Generators and Auxiliaries
-31000 Reactor
-32000 Moderator System
-32100 Moderator Main Circuit
-32200 Moderator Purification System
-32300 Moderator Cover Gas System
-32500 Moderator Collection System
-32700 Moderator Liquid Poison System
-33000 Primary Heat Transport System
-33100 Main Heat Transport System
-33300 Primary Heat Transport Auxiliaries
-33400 Cooling Systems
-33500 Gas Control System
-33600 Overpressure Relief System
-33700 D2O Sampling System
-33800 Collection System
-33900 Installation and Maintenance Equipment
-34000 Auxiliary System
-35000 Fuel Transfer and Storage
-36000 Steam Generator Steam and Water Systems
-37000 Fuel
-38000 Heavy Water Management
-40000 Turbine, Generator and Auxiliaries
-50000 Electric Power Systems
-60000 Instrumentation and Control
-70000 Common Processes and Services
-80000 Construction Plant
-90000 Operations and Commissioning

[Discipline]:
-Biology
-Chemical Engineering
-Chemistry
-Civil Engineering
-Electrical Engineering
-Environmental Engineering
-General Engineering
-General Science
-Health Physics
-History
-Materials Engineering
-Mathematics
-Mechanical Engineering
-Nuclear Engineering
-Physics
-Psychology

[Topic]:
-Basic Equations
-Conceptual
-Corrosion
-Costs
-Fluid Mechanics
-Fuel Management
-Function
-Heat Transfer
-Heavy Water
-Human Factors
-Important Parameters
-Index
-Intro and Overview
-Layout
-Maintainability
-Modeling
-Objectives
-Performance
-Physical Description
-Process Systems
-Purification
-Radiation
-Reactor Physics
-Reliability
-Safety
-Shielding
-Steady State
-Table of Contents
-Thermalhydraulics
-Thermodynamics
-Transient
-Tritium
-Waste Handling

[Phase]:
-Commissioning
-Concept
-Construction
-Decommissioning
-Design
-Design Analysis
-Design Description
-Design Evolution
-Design Manual
-Design Optimization
-Design Process
-Design Requirements
-Development
-Licensing
-Operation
-Safety
-Safety Analysis

[Audience]:
-College
-Engineer
-Grad
-High
-K-8
-Manager
-Technician
-Ugrad
-Vendor 		Jump to year -> [1966-07-01] [1981-11-01] [1984-03-01] [1988-04-01] [1993-01-01] [2002-01-01]
[Concept]: Heat and Thermodynamics Documents This page updated on 03/18/2025 22:57:40

Documents below are listed chronologically. Use the links on the left or below to filter documents by keyword. Use the links above to jump to a specific year on this page.

Number of files: 45

    1966-07-01---------Jump to [Top]
  1. Heat and Thermodynamics, Course 1A25, Nuclear Training Course , by George Howie, OPG, 1966-07-01. Doc type: Course.
    Summary: Basic concepts of thermodynamics
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full course, sections 1 to 10. OH-1A25-1966.pdf (5569 kb)
    2. 1981-11-01---------Jump to [Top]
  2. Heat and Thermodynamics, Course 125, Nuclear Training Centre, OPG, 1981-11-01. Doc type: Course.
    Summary: Basic concepts of heat and thermodynamics: steam tables, Mollier diagrams, turbine, feedheater, condenser, steam generator, reactor.
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full Course 20050100.pdf (6328 kb)
    - Module B.7 Course Procedures 20050101.pdf (302 kb)
    - Module B.6 Basics 20050102.pdf (339 kb)
    - Module B.5 Steam Tables 20050103.pdf (740 kb)
    - Module B.4.2 Entropy, Throttling and Molier Diagram 20050104.pdf (904 kb)
    - Module B.4.1 Turbine With Reheat 20050105.pdf (684 kb)
    - Module B.3.2 Feedheater Operation 20050106.pdf (569 kb)
    - Module B.3.1 Condenser Performance 20050107.pdf (594 kb)
    - Module B.2 Steam Generator 20050108.pdf (477 kb)
    - Module B.1 Reactor 20050109.pdf (826 kb)
    - B.6 Self Evaluation 20050110.pdf (87 kb)
    - B.5 Self Evaluation 20050111.pdf (69 kb)
    - B.4.2 Self Evaluation 20050112.pdf (118 kb)
    - B.4.1 Self Evaluation 20050113.pdf (103 kb)
    - B.3.2 Self Evaluation 20050114.pdf (121 kb)
    - B.3.1 Self Evaluation 20050115.pdf (118 kb)
    - B.2 Self Evaluation 20050116.pdf (137 kb)
    - B.1 Self Evaluation 20050117.pdf (102 kb)
    - Criterion Tests 20050118.pdf (134 kb)
    3. 1984-03-01---------Jump to [Top]
  3. Heat and Thermodynamics, Course PI 25, Nuclear Training Centre, OPG, 1984-03-01. Doc type: Course.
    Summary: Basic concepts of heat and thermodynamics: expansion and contraction, heat transfer, pressure control, Mollier diagrams, efficiency, the CANDU cycle.
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full Course 20050200.pdf (3028 kb)
    - 25-0 Introduction and Course Procedures 20050201.pdf (336 kb)
    - 25-1 Basics 20050202.pdf (471 kb)
    - 25-2 Expansion and Contraction 20050203.pdf (351 kb)
    - 25-3 Heat Transfer Calculations 20050204.pdf (183 kb)
    - 25-4 Pressure Control 20050205.pdf (200 kb)
    - 25-5 Mechanisms of Heat Transfer 20050206.pdf (144 kb)
    - 25-6 Mollier Diagrams and The Turbine Process 20050207.pdf (679 kb)
    - 25-7 Efficiency and The CANDU Cycle 20050208.pdf (298 kb)
    - 25-8 Criterion Tests 20050209.pdf (105 kb)
    - 25-9 Self Evaluation Answer Sheet 20050210.pdf (309 kb)
    4. 1988-04-01---------Jump to [Top]
  4. Heat and Thermodynamics, Course 225, Nuclear Training Centre, OPG, 1988-04-01. Doc type: Course.
    Summary: Basic concepts of heat and thermodynamics: steam tables, Mollier diagrams, turbine with reheat, feedheater, condenser, steam generator, reactor.
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full Course 20043100.pdf (4667 kb)
    - Index 20043101.pdf (208 kb)
    - Module 1 Basics 20043102.pdf (404 kb)
    - Module 2 Steam Tables 20043103.pdf (636 kb)
    - Module 3 Entropy, Throttling and Mollier Diagrams 20043104.pdf (701 kb)
    - Module 4 Turbine with Reheat 20043105.pdf (611 kb)
    - Module 5 Feedheater Operation 20043106.pdf (511 kb)
    - Module 6 Condenser Performance 20043107.pdf (546 kb)
    - Module 7 Steam Generator 20043108.pdf (382 kb)
    - Module 8 Reactor 20043109.pdf (710 kb)
    5. 1993-01-01---------Jump to [Top]
  5. Principes de Science et de Fonctionnement des Réacteurs - Chaleur et Thermodynamique, CNSC, 1993-01-01. Doc type: Course.
    Summary:
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Chaleur et Thermodynamique 20070900.pdf (850 kb)
    - Cover Page 20030900.pdf (83 kb)
    - 20030901.pdf (647 kb)
    - Presentation 20030902.pdf (1557 kb)


[Author Index]
-, A.C. Mao
-Adachi, and J.D.
-Archinoff, G.H.
-Arsenault, Benoit
-Aubin, A.
-Banerjee, S.
-Barkman, Nick
-Bate, D.L.S.
-Bennett, L.L.
-Bereznai, G.
-Bewers, J.M.
-Boczar, P.G.
-Boyd, F.C.
-Brenciaglia, John
-Bromley, Blair P.
-Brooks, G.L.
-Brooks, Gordon L.
-Broughton, A.
-Buell, J.R.
-Burnham, J. U.
-Burnham, J.U.
-Burnham, Jan
-Bush, W.R.
-Busigin, A.
-Cameron, Ian
-CANTEACH
-Carter, T.}.
-Carver, M.B.
-Cashwell, J.W.
-Cenanovic, Matija
-Chaplin, Robin
-Chow, H.C.
-Chuanqing, Lin
-Cloutier, L.
-Courchesne, L.
-Cowper, G.
-Cramer, J.
-Crist, J.
-Crist, J.E.
-Critoph, E.
-D.Dueck
-Daams, J.
-Dahlinger, A.
-Dastur, A.R.
-Disney, and D.J.
-Doria, F.J.
-Dueck, D.
-Dueck, Dick
-Dyckerhoff, D.
-Dyke, J.M.
-Editor-in-Chief
-Elisson, K.
-Elston, K. E.
-Fehrenbach, P.J.
-Fenn, J.H.
-Forsstrom, Hans G.
-Foster, John S.
-Frescura, G.M.
-Garland, Bill
-Garland, W.J.
-Garland, Wm. J.
-Gertz, C.P.
-Glockler, Oszvald
-Goland, David
-Gonzalez, F.
-Grant, I.
-Gray, J.L.
-Groh, John L.
-Groom, Stu
-Haacke, L.
-Haasz, A.A.
-Haines, R.I.
-Hancock, D.C.
-Hancox, W.T.
-Hanna, B.N.
-Harms, Archie
-Harrison, V.A.
-Hart, R.S.
-Harvey, S.B.
-Hassmann, K.
-Hebert, Alain
-Hedges, K.R.
-Hewitt, and I.S.
-Hongqi, Gong
-Horton, E.P.
-Horton, S.G.
-Hotte, G.
-Howey, G.R.
-Howie, George
-Howieson, J.Q.
-Hussein, E.
-Hussein, E.M.A.
-Hutchinson, F.J.
-Ingham, P.J.
-Jaitly, R.
-Jenkins, D.A.
-Jennekens, Jon
-Jianping, Cai
-Jianqiang, Shan
-Jijun, Xu
-Jizhou, Zhu
-Johnson, L.H.
-Johnston, Norman C.
-Johnston, R.C.
-Judd, R.A.
-Kay, J.M.
-Keyes, W.
-Kiteley, J.e.
-Koclas, J.
-Kosarenko, Yulia
-Krasnoebski, J.
-Krishnan, V.S.
-L.Brooks, Gordon
-Lafortune, J.F.
-Lane, A. D.
-Lavoie, P.A.
-Lee, A.G.
-Lee, W.
-Lewis, W.B.
-Lightfoot, Malcolm
-Lister, D.
-Locke, K.E.
-Lowe, P.O.
-Luxat, J.e.
-Luxat, John C
-MacBeth, M.
-MacBeth, Mike
-Macici, and N.
-MacPherson, J.A.
-Mallory, J.P.
-Manzer, A.M.
-Maureira, Hugo
-McConnell, Lorne G.
-McDevitt, C.A.
-McLean, Adam
-McNair, G.W.
-McQuade, D.
-McQuade, Dennis
-Meneley, D.A.
-Meneley, Dan
-Merz, E.R.
-Miglin, and B.P.
-Milgram, M.S.
-Milley, D. C.
-Morison, W.G.
-Mosey, Alan Wyatt; David
-Mosher, M.E.
-Muzumdar, A.P.
-Muzumdar, and A.P.
-Myers, O.K.
-Needham
-Neuhauser, K.S.
-Nucleonics
-OConnor, D.R.
-Odoj, and R.
-Olmstead, R.A.
-Olsen, J.L
-Ott, K.O.
-Owen, D.G.
-Page, R.
-Page, R. D.
-Page, R.D.
-Parent, G.
-Pasanen, A.A.
-Pease, L.
-Penn, W. J.
-Petrunik, Ken
-Ping, He
-Pon, G.A.
-Poolpol, and S.
-Popple, R.T.
-Porter, R.S.
-Primeau, D.B.
-Rao, P.K.M.
-Reardon, P.C.
-Renshaw, R.H.
-Rixin, Kang
-Roberts, J.G.
-Robertson, J.A.L.
-Rogers, J.T.
-Ronald
-Ross-Ross, P.A.
-Rouben, and B.
-Rouben, B.
-Rouben, Ben
-Rozon, D.
-Rozon, Daniel
-Ruan, Y.Q.
-Rummery, T.E.
-Sainsbury, J.D.
-Schneider, W.G.
-Schoonen, D.H.
-Schultz, C.L.
-Sen, Shen
-Shalaby, B.A.
-Sheppard, S.
-Siddall, E.
-Sigh, A.
-Simmons, R.B.V.
-Sinclair, A.N.
-Singh, H.
-Snell, V.
-Snell, V.G.
-Sood, S. K.
-Spekkens, P.
-Staff
-staff, AECL
-Stangeby, P.c.
-Stelliga, D. J.
-Stevenson, D.
-Stevenson, J.D.
-Suizheng, Qiu
-Tahir, and A.
-Talbot, K.H.
-Tapping, R.L.
-Tapucu, A.
-Taylor, R.B.
-Theus, G.}.
-Usmani, S.A.
-Vaccaro, F.P.
-Vandergraaf, and T. T.
-Varanasi, Surya
-Voss, James T.
-Wakeman, and B.H.
-Wanggui, Jin
-Webber, C.E.
-Wenhui, Song
-Werner, M.M.
-Whitlock, J. J.
-Whitney, R.
-Wieckowski, G.
-Wiener, E.S.
-Wight, A.L.
-Wilkin, G.B.
-Williams, A.
-Wilson, B. K.
-Winfield, D.
-Woodhead, L. W.
-Woolever, C.A.
-XingGuan, Zhu
-Yagoubi, Mostafa
-Yan, Ji
-Yanfa, Zhang
-Yaremy, E.M.
-Zhang, Jianmin
-Zhang, Shao-hong
-Zhenhua, Zhang
-Zhizhang, Huang
-Zhonsheng, Xie
-Zikovsky, L.
-Zikovsky, Lubomir
---end of page---